IB Biology IA rubric: the four criteria explained

The IB Biology IA is a scientific investigation report marked on four criteria: research design, data analysis, conclusion and evaluation. Each is worth 6 marks, 24 in total, and the IA counts for 20% of the final grade. Below, each criterion is broken down band by band, with how to reach 5–6 and where marks are usually lost.

Updated 2026-11-09

IB Biology IA at a glance

Total
24 marks (4 criteria × 6)
Weighting
20% of the final grade (SL and HL)
Word limit
3,000 words
Recommended time
About 10 hours of class time
Marking
Marked by your teacher, moderated by the IB
Applies from
May 2025 onwards
CriterionMarksWeightingWhat it assesses
Research design625%Whether you communicate your methodology, both why you chose it and how you carried it out, clearly enough to show how it answers your research question.
Data analysis625%Whether you record, process and present your data in ways that are relevant to the research question.
Conclusion625%Whether you answer your research question from your own analysis and in the light of accepted scientific context.
Evaluation625%Whether you evaluate your methodology and suggest improvements.
Total24100%

Based on the IB Diploma Programme Biology guide (first assessment 2025; published February 2023, updated March 2024), section “Internal assessment criteria—SL and HL”. Band descriptions are summarised in our own words; follow the official guide your school provides.

1. Research design (6 marks)

Whether you communicate your methodology, both why you chose it and how you carried it out, clearly enough to show how it answers your research question.

MarksWhat the work shows
0Does not reach the 1–2 descriptors.
1–2The research question is stated with no context; methodological considerations are only stated; the method lacks the detail needed to reproduce the investigation.
3–4The research question is outlined within a broad context; considerations for collecting relevant and sufficient data are described; the method could be reproduced with few ambiguities or omissions.
5–6The research question is described within a specific, appropriate context; considerations for collecting relevant and sufficient data are explained; the method allows the investigation to be reproduced.

What the guide clarifies

  • A research question with context names the independent and dependent variables (or two correlated variables), briefly describes the system being studied and gives directly relevant background theory.
  • Methodological considerations cover how the variables are measured; how a database or model is chosen and sampled; the range, interval, repeats and precision of measurements; which variables are controlled and how; and any safety, ethical or environmental issues.
  • The method should give specific materials and precise steps without padding, so a reader understands it and could in principle repeat it.

Where marks are lost

  • A research question that only says “the effect of X on Y”, with no organism, conditions or measurement.
  • Background theory copied at textbook length and only loosely linked to the question.
  • Controlled variables listed in a table with no method or reason.
  • Missing key values such as concentrations, volumes or times in the procedure.

Reaching the top band: Give a reason for every methodological choice: why this range and interval, why five repeats, why this controlled variable would affect the result. The step from 3–4 to 5–6 is the step from describing to explaining.

2. Data analysis (6 marks)

Whether you record, process and present your data in ways that are relevant to the research question.

MarksWhat the work shows
0Does not reach the 1–2 descriptors.
1–2Recording and processing are communicated but neither clearly nor precisely; there is little consideration of uncertainties; some relevant processing is done but with major omissions, inaccuracies or inconsistencies.
3–4Communication is either clear or precise; uncertainties are considered but with some significant omissions or inaccuracies; relevant processing has some significant omissions, inaccuracies or inconsistencies.
5–6Communication is both clear and precise; uncertainties are considered appropriately; relevant processing is carried out appropriately and accurately.

What the guide clarifies

  • Data means quantitative data, or quantitative and qualitative data together.
  • Clear means the processing is easy to follow; precise means conventions are followed, such as labelled graphs and tables, units, decimal places and significant figures.
  • How uncertainties are treated is subject-specific; for biology, the IB's teacher support material gives further guidance (for example measurement uncertainty, standard deviation and error bars).
  • Major problems prevent a valid conclusion; significant problems still allow one, but limit its validity or detail.

Where marks are lost

  • Decimal places that do not match the measurement precision, or missing units.
  • Means with no measure of spread or uncertainty.
  • Graphs without titles, axis labels or error bars.
  • A statistical test with no assumptions stated or result interpreted.

Reaching the top band: Make the raw data table, the processing (with one worked example) and the graph agree: consistent decimal places in each column, units and uncertainties in the headers, error bars on the graph, and a reason for any statistical test plus what its result means.

3. Conclusion (6 marks)

Whether you answer your research question from your own analysis and in the light of accepted scientific context.

MarksWhat the work shows
0Does not reach the 1–2 descriptors.
1–2A conclusion relevant to the research question is stated but is not supported by the analysis; comparison with accepted scientific context is superficial.
3–4A relevant conclusion is described but is not fully consistent with the analysis; it makes some relevant comparison with accepted scientific context.
5–6A relevant conclusion is justified and fully consistent with the analysis, and justified through relevant comparison with accepted scientific context.

What the guide clarifies

  • A fully consistent conclusion interprets the processed data, including its uncertainties.
  • Scientific context can come from published material (print or online), published values, course notes or textbooks; citations must be detailed enough for the source to be traced.

Where marks are lost

  • Claiming more than the data support, or saying the data “prove” a hypothesis.
  • Ignoring uncertainty, for example claiming a clear difference where error bars overlap.
  • Saying the result “agrees with theory” without citing a specific source or value.

Reaching the top band: Answer the research question in the first sentence, support it with the data (trend, values, statistics and uncertainty), then compare with published findings: where they agree, where they differ and why that might be.

4. Evaluation (6 marks)

Whether you evaluate your methodology and suggest improvements.

MarksWhat the work shows
0Does not reach the 1–2 descriptors.
1–2Generic methodological weaknesses or limitations are stated; realistic improvements are stated.
3–4Specific methodological weaknesses or limitations are described; realistic improvements relevant to them are described.
5–6The relative impact of specific weaknesses or limitations is explained; realistic improvements relevant to them are explained.

What the guide clarifies

  • Generic means true of many methods and not specific to yours (for example “human error” or “not enough repeats”).
  • Methodological covers both the overall approach and the procedural steps.
  • Weaknesses can concern the control of variables, the precision of measurement or the variation in the data.
  • Limitations can concern how far the conclusion extends, given the range of data, the system studied or the assumptions made.

Where marks are lost

  • “Human error” or “inaccurate equipment” with no specific step named.
  • Improvements that are unrealistic (equipment the school does not have) or unrelated to the weakness.
  • No sense of which problem affected the result most.

Reaching the top band: Write each weakness as problem → effect on the data (direction and size) → specific improvement, and say which mattered most. Relative impact is the phrase that separates 5–6 from 3–4.

How the IA is marked

Best fit

For each criterion the teacher chooses the band that best matches the work overall. Not every point in a band has to be met; when the work sits in different bands on different points, the mark reflects the balance.

Upper or lower mark in a band

The upper mark goes to work that largely meets the band and is close to the next; the lower mark to work that meets it to a lesser extent. Only whole marks are given.

Criteria are independent

A high mark on one criterion does not imply high marks on the others. The top band does not require faultless work.

Teacher-marked, IB-moderated

Your teacher marks SL and HL against the same criteria, and the IB moderates a sample, which can move marks up or down.

Biology IA word count and format

  • The report has a 3,000-word limit. Not counted: charts and diagrams, data tables, equations, formulas and calculations, citations (parenthetical, numbered, footnotes or endnotes), the bibliography and headers.
  • At the start, state the title, your personal code (alphanumeric, such as xyz123), any group members' personal codes and the word count. No cover page or contents page is needed.
  • The IA must be your own work. Your teacher gives advice on one draft without editing it, and the next version is the final one. The same work cannot be submitted for both the IA and the EE.

Individual and group investigations

Data sources

Hands-on lab work, fieldwork, spreadsheet analysis or modelling, data from a database, or a simulation, alone or combined. You must collect and analyse quantitative data, supported by qualitative observations where appropriate.

Individual work

Each student formulates and answers a unique research question and may not present the same raw data as another student. You can manipulate an independent variable, select variables in fieldwork or select different data from a database; peers may help collect data.

Collaborative work (optional)

Groups of up to three. Each student's question must differ: a different independent variable, the same independent variable with a different dependent variable, or different data from a shared data set. The report is written individually; group reports are not allowed.

Old and new rubric compared

Before 2025 (last examined in November 2024), the Biology IA used five criteria, also out of 24: personal engagement 2, exploration 6, analysis 6, evaluation 6 and communication 4. The current guide drops the separate personal engagement and communication criteria, concentrates the marks on research design, data analysis, conclusion and evaluation, and allows collaboration in groups of up to three. Many exemplars and rubrics online still follow the old five criteria, so check which version you are reading.

Current criteria (2025 on)MarksOld criteria (to 2024)Marks
Research design6Exploration6
Data analysis6Analysis6
Conclusion6(part of Evaluation in the old rubric)—
Evaluation6Evaluation6
——Personal engagement2
——Communication4

Checklist before you submit

  1. The research question names the independent and dependent variables, the organism or system and how it is measured.
  2. Background theory covers only what bears directly on the question.
  3. Every methodological choice (range, interval, repeats, controlled variables) has a reason, and safety, ethical and environmental issues are addressed.
  4. Someone else could repeat the method from your description.
  5. Tables and graphs have titles, units and uncertainties; decimal places match measurement precision; graphs have error bars.
  6. At least one worked calculation is shown; any statistical test has a reason and an interpreted result.
  7. The conclusion answers the question in its first sentence, is supported by the data and its uncertainty, and is compared with traceable sources.
  8. The evaluation names specific weaknesses, explains their relative impact and pairs each with a realistic improvement.
  9. The title, personal code and word count are at the top, the body is within 3,000 words and every source is cited.

Get feedback on your IA

Want your Biology IA read against these criteria? Contact us: a tutor will go through your plan or draft criterion by criterion and tell you where the marks are going.

Frequently asked questions

How many marks is the IB Biology IA out of?

24 marks: four criteria of 6 marks each (research design, data analysis, conclusion and evaluation), each worth 25% of the IA. The IA is 20% of the final Biology grade.

What is the IB Biology IA word count?

The limit is 3,000 words. Charts, diagrams, data tables, equations and calculations, citations, the bibliography and headers do not count.

Is the Biology IA rubric different for SL and HL?

No. SL and HL students complete the same scientific investigation, marked against the same criteria and weighted 20% at both levels. Chemistry and Physics use the same IA requirements and criteria.

How is the new Biology IA different from the old one?

The old IA had five criteria (personal engagement, exploration, analysis, evaluation and communication). From 2025 there are four criteria of 6 marks each, and students may collaborate in groups of up to three, though each writes an individual report.

Can I use a database or simulation for my Biology IA?

Yes. The guide allows lab work, fieldwork, spreadsheet modelling, database data and simulations, as long as you analyse quantitative data and the investigation gives all four criteria something to assess.